Idiomas disponibles
Idiomas disponibles
OPERATION
● Before plugging in the device, make sure the switch on the
back of the cooler is set to the OFF setting. Then, insert the
power cord into the unit.
● Insert the plug into a wall outlet or cigarette lighter outlet in a
car.
● For Cooling: Set the power switch to the COLD setting. A
green light (A) will turn on to indicate the device in now in
cooling mode.
● For Warming: Set the power switch to the HOT setting. A red
light (B) will turn on to indicate the device is now in heating
mode.
*Attachment: the different use between outdoor and indoor*
Attachments
DC Power Cord
(Power cord for car)
EN
AC Power Cord
(Household power cord)
While using car power:
● Turn on the car engine before plugging in the
Cooler and Warmer to avoid a power surge that
could result in overheating and a potential fire risk.
● Plug the 12V DC power cord into the DC port in
the back of the device. Plug the other end of the 12V
DC power cord into the car cigarette lighter
● Set the Cooler and Warmer to the desired setting
and enjoy your cold drinks or heated foods on the
go!
When car power is used(DC 12V)
OPERATION
Connector
Plug
Connector
Plug
Whilie cooling
220-240V
While using household power:
● Plug the AC power cord connector into the back of
the unit.
● Plug the other end into any 220-240V wall outlet.
● Set the Cooler and Warmer to the desired setting
and enjoy your cold drinks or heated foods.
When the household power is used(AC 220-240V)
6
Whilie warming
COLD/HOT SWITCH
CAR POWER SOCKET
HOUSEHOLD SOCKET
220-240V
120V
