Idiomas disponibles
Idiomas disponibles
Step 3: Head light installation.
Step 4: Front wheel installation.
Step 5: Pedal installation.
Note the markings on the pedal screws and on the crank arms. Stamp with "L" is the left pedal, stamp
with "R" is the right pedal, the right pedal is installed on the side of the sprocket.
NOTE: The right pedal (pedal with "R" sticker label) is threaded so that it is tightened by turning
clockwise. The left pedal (pedal with "L" sticker label) is reverse-threaded and tightens counterclockwise.
EN
Loosen the front light fixing screw on the front fork. Adjust the head
light to desired position, tighten the screw with a hex key.
12
Take out the front wheel and remove
the protective guard. And remove the
fork protective cover. Align the hole in
the bottom of the front suspension fork
with the front wheel axle. Ensure the
brake rotor is between the brake pads
of the brake caliper. Then insert the
front axle and tighten the screw with a
hex key.
