Idiomas disponibles
Idiomas disponibles
SETUP STRIDE & WEIGHT
Calculate your stride length:
To Set your Weight / Stride Length you need to be on the Step Screen
Click the «MODE» button until you see the Clock, click «MODE» once more for Step Screen
1.
If 30 seconds passes without a button press, the pedometer will exit the setting sequence
2.
Programming sequence runs forward only, if a mistake is made, you can easily restart programming
•
PRESS & HOLD «SET» button – ADJ Flashes on screen
•
RELEASE «SET» Button when UNIt flashes
•
PRESS «MODE» button for Miles or PRESS «RESET» to toggle to Kilometers, then PRESS «MODE»
•
PRESS «RESET» button to advance Weight to correct weight
(Set weight as low as 44 Lbs./20Kg. by cycling past the max. of 441Lbs./200Kg.)
•
PRESS «
MODE
» button to save weight
•
PRESS «RESET» button to advance Stride Length
(Set weight as low as 12"/20cm. by cycling past the max. of 71"/180cm)
•
PRESS «SET» to Save and Exit
Congratulations Weight & Stride Setup are Complete!
Distance inaccurate? If lower than expected, increase stride length by 3" (8cm), if higher than
expected decrease stride length by 3" (8cm). Making these minor adjustments won't affect any other
values, but will improve your distance accuracy. It may take a couple of adjustments.
www.ozofitness.com/stride
[email protected] | www.ozofitness.com/SC2
4
