Idiomas disponibles
Idiomas disponibles
Stroller Assembly
Please read all the instructions in this manual before assembling and using this product.
Open Stroller
Press the handle adjustment butttons on left and right of the handle
2
- 2
Rotate handle upward until it is upright
.
3
- 1
Push secondary lock
and squeeze one-hand-fold handle
Latches should click into place.
!
Check that the stroller is completely open before continuing.
Assemble Front Wheels
Assemble front wheels to front legs. Check that wheels are securely attached by pulling on wheel assemblies.
Assemble Rear Wheels
Assemble rear wheels to rear legs. Check that wheels are securely attached by pulling on wheel assemblies.
The rear wheels can be disassembled by pressing the snap buttons.
Assemble Hood
To assemble the hood, push hood pivots into the hood mounts
Secure Footrest
- 1
Push the footrest down to secure it.
7
The completely assembled stroller is shown as
7
Stroller Operation
Adjust Recline
Recline Backrest
There are 4 angles for the backrest.
To recline the backrest, squeeze the recline handle on the back of the seat
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
Use Armbar
The armbar can be pulled up on both left and right sides.
- 1
Press armbar release button
10
, and then pull up the armbar
component, and then push down to lock.
Tip
Armbar can be open for easily placing and removing.
13
- 1
2
.
3
- 2
. Meanwhile, pull the stroller backward.
6
.
8
, pull down on the backrest.
- 2
10
. Align the armbar end with matching
Use Buckle
Release Buckle
Press the center button to release the buckle.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A click sound means the buckle is locked completely.
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child's neck.
4
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
5
shoulder and waist harnesses are at proper height and length.
- 1
13
Shoulder harness anchor A
- 2
13
Shoulder harness anchor B
- 3
13
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the short side facing
forward. Thread it through the shoulder harness slot from back to front
is closest to child's shoulder height.
Use slide adjuster to change the harness length.
- 2
Press the button
15
Adjust Calf Support
There are two recline angles, 1-2
To raise calf support, push the calf support from position 1 to position 2
To lower calf support, press the adjustment buttons on both sides of the calf
-1
support
17
, and rotate the calf support downwards.
9
Adjust Handle
Handle can be adjusted to 2 positions.
To adjust the handle, press the left and right handle adjustment buttons at the same time
handle to a desirable position.
Use Hood
To open the canopy, pull canopy toward front.
To fold the canopy, pull canopy toward back.
11
- 1
12
, and click into the center buckle.
- 3
12
14
- 2
14
- 1
15
, while pulling the waist harness to proper length
16
for adjustment.
- 2
17
18
- 2
19
19
- 2
12
- 1
. Rethread it through the slot that
- 3
15
.
16
.
- 1
18
, rotate the
14
