LD Systems QTP 5 Manual De Usuario página 5

INSTALLATION
Make sure the flush-mounted box is deep enough (connection terminal plus Ethernet plug).
RECOMMENDATION: Mount the touch panel in landscape format with the locking screw
pointing to the right on a suitable location on a wall.
A
The mounting plate of the QTP5 touch panel is compatible with EU type and type 86 flush-mounted boxes. Installation of the touch panel only
by authorised specialist personnel and electricians. No liability is assumed for the mounted flush-mounted box and its function. Inspection by
qualified personnel is required.
Loosen the locking screw from the mounting plate, remove the mounting plate from the touch panel and fix it to the corresponding
A
flush-mounted box. Now make the cable connections with the touch panel. Place the touch panel on the mounting plate so that the two hooks
on the left side of the mounting plate engage in the corresponding recesses in the touch panel and secure the connection with the previously
loosened locking screw.
A
A
HOLE SPACING (mm)
5