Idiomas disponibles
Idiomas disponibles
DIP switch settings
Dipswitch
Auto
(switches between flash/fade) X X X X X X X √ X √
Sound activated
Flash
Full On
Fade In-Out
Fade Out
DMX
Notes:
① √ means on, X means off, O means on and off is selectable
② When in DMX control, the address can be set by dipswitches 1 – 9.
③ 0x - 16x means 1 time - 32 times of speed. Speed switches can be any combination, adjustment range is
(0x~31x).
DMX Settings
DMX Channel
1. Total function control
Speed control
2. Dimmer/
A DMX signal terminator is recommended to avoid a bad signal caused by other electrical devices. A DMX terminator is a
XLR connector with a 120Ω resistor between pin 2 and pin 3 of the XLR connector. Connect it to the last OUTPUT socket
of the final light.
See picture:
IN
OUT
1 2 3 4 5 6 7 8 9 10
X X X X X X √ X X √
0 0 0 0 0 0 X X √ √
0 0 0 0 0 0 X √ √ √
0 0 0 0 0 0 √ X √ √
0 0 0 0 0 0 √ √ X √
0 0 0 0 0 0 0 0 0 X Dip 1-9 Address set
DMX Value Display
0~36
37~72
73~108
109~146
147~186
187~216
217~255
0~255
IN
www.tronios.com
Copyright © 2011 by TRONIOS the Netherlands
Dip 1-6 Flash speed
Dip 1-6 Dimmer
Dip 1-6 Fade speed
Dip 1-6 Fade speed
Specifications
Dimmer (channel 2 dimmer 0-100%)
Flash (channel 2 flash speed (slow-fast)
Fade (channel 2 fade speed (fast – slow)
Fade out (channel 2 fade speed (fast – slow)
Fade in (channel 2 fade speed (fast – slow)
Auto (switches between flash/fade programmes)
Sound activated
Dimmer/speed control Ch1
OUT
IN
OUT
120Ω
