Idiomas disponibles
Idiomas disponibles
LIGHT EFFECTS
1. Short press
2. Long press
3. Long press
4.Double click
CHARGING IN
1. PlugoneendoftheUSBchargingcable(included)intotheDC5V
in jack located at the back of the unit. Plug the other end into a USB
powered port or any other USB AC adapter (not included).
2. Thebatteryisnormallyfullychargedwithin6.5hours.Ifmusicis
playing while the battery is being charged, it may take longer.
3. TheredLEDlightindicatesthattheunitischarging,andwillturnoff
oncefullycharged.Pleasedisconnectafterthelightturnsoff.
CHARGING OUT
1. Use the charging cable of the mobile device to connect to the USB
Type A jack on the back of the speaker.
2. Thespeakercanprovide5V/1000mAoutput,ifdevicetobecharged
requiresmorecurrentoutput,theUSBportwillshutoffforsafety
reasons. If the speaker is unable to charge another device after
shuttingoff,pleaserechargetheunitforawhiletoreactivate.
3. For the charging out function, the speaker must be turned on.
Remark:Whenthebatteryislow,awarningsoundwillappear.Theunit
will also readjust the volume meanwhile.
TWS (TRUE WIRELESS STEREO) FUNCTION
Two speakers can be synced and connected through TWS to build a left
and right stereo sound system for surround sound.
1. Press and hold
2. Press the
hearabeepwhenthetwospeakersarepaired(approximately10
seconds).
3. The white LED on the main speaker will be ON, the white LED on the
secondspeakerwillflash.
4.TurnBluetoothONinyourdevicesettingandselect"JVCXS-KY3213B"
and the device will be ready to play music.
NOTE: Once paired, the two speakers will automatically pair each time
they are turned ON. To unpair them, press the
ThespeakerwillbeepandbothLEDswillflashindicatingthatthe
speakers are no longer paired.
buttontoselectdifferentlightmodes.
buttontoturnofftopandbottomlight.
buttontoturnoffcenterlight
buttontoturnoff/onwhitelightofbothsides.
the button on each speaker to turn both ON.
button on both speakers to enter TWS mode, you will
button to disconnect.
5
