Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTION
The fan should be installed on a solid wooden or pillar which
stands vertically to the oor.
Caution : To prevent the fan from falling o , do not install it on
walls less then 10 cm thick or made of materials that are
easily damaged.
Installing the mounting bracket
Fix the supplied mounting bracket rmly to the wall using the
three screws.
Installing the stand
Mount the stand on the bracket by inserting the bracket catch
into the slot on the stand.
Fix the stand onto the bracket with a retaining nut.
SPEED ADJUSTMENT
Adjust to the desired speed by pulling the switch cord (A).
0---O
1---Low 2---Medium 3---High
OSCILLATION CONTROL
Pull switch cord (B) to start and stop oscillation.
TO ADJUST THE WIND DIRECTION
Push the guard lightly to the desired up or down direction.
Note:
The bracket should be positioned at least 35 cm from the ceiling and at least 30
cm from adjoining wall.
Note:
If the retaining nut does not pass through the holes, push the stand downwards
until it is fully mounted on the bracket.
4
