Intellinet Network Solutions IPIE-80G Instrucciones página 2

Instructions
This guide presents the basic steps to set up and operate this device.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/508957 or scan the QR code on the cover.
Connections
1 Wire the grounding terminal
to an earth grounding object
to protect equipment from
external electrical surges.
2 Plug a Cat5e/6 Ethernet cable — up
to 100 m (330 ft.) long — from your
powered source device (for example, a PoE
injector or switch; up to 90.0 W, 50.0 - 57.0
VDC; IEEE 802.3bt/at/af compliant) into
the PoE IN connector on the extender.
3 Plug a second Cat5e/6 Ethernet cable —
also up to 100 m long (330 ft.) — from
Placement
Desktop Installation
Prior to use, place/position the device:
• on a level surface that can support its weight and has at
least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios,
transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network
devices it's to be connected to.
DIN-Rail Installation
1 Angle spring of mounting clip over top lip of DIN rail.
2 Push device down till clip clicks onto rail.
3 Ensure installation is stable.
2
English
3 2
the device you want to transmit power
(up to 80 W) and data to (for example,
a PoE network camera) into the PoE
OUT connector on the extender.
4 LEDs (lit): PWR — Extender is powered
on; LINK — Valid port connection ;
PoE — Extender is delivering power.
4 1
2
1
3