Idiomas disponibles
Idiomas disponibles
1
OUTLET BOX
Install the mounting bracket onto Outlet Box
with Mounting Screws.
2
4
Loosen the Screws and Remove the Clevis Pin, Nut, Spring Washers,
Flat Washers & Bolt on Coupling.
4
3
Route the wires and safety wire from the motor through the Downrod.
Install the Downrod to Coupling and secure with Bolt, Flat Washer,
Spring Washer, Nut & Clevis pin. Tighten the 2 Set Screws on the
Coupling.
WOODEN CEILING
Use the Mounting Bracket as a guide, drill 4
holes for 3MM diameter, install the mounting
bracket onto wooden ceiling with the 4 Self
Tapping Screws & Washers.
3
1
1
2
5
4
6
Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Use the Mounting Bracket as a guide, drill 4 holes
and insert 4 Expansion Bolts into the concrete
ceiling, install the mounting bracket and secure with
Flat Washers, Spring Washers and Nuts.
3
2
Loosen the Screw from Hanger Ball, remove the Hanger Ball and Lock
Pin.
5
5
Route the Coupling cover, Canopy Ring, Canopy and Hanger Ball
through the Downrod in turn, and then install the Lock pin through the
hole on the Downrod. Slip the hanger ball upward to lock Pin, and fix
it by Screw, then slip down the Coupling Cover in correct position.
A570801CA
CONCRETE CEILING
1
2
4
6
7
3
2
1
