Idiomas disponibles
Idiomas disponibles
STEP 3
1. Screw 2 cam bolts (A) into the pre-threaded holes on the bottom board (6).
2. Screw 2 cam bolts (A) into the pre-threaded holes on the top board (1).
3. Attach 1 magnet (E) to top board (1) by inserting 2 screws (D) through the holes on the magnet
(E) then tighten to top board (1).
STEP 4
1. Insert 4 wood dowels (C) into the wood dowel holes on the bottom board (6).
2. Attach bottom board (6) to pre-assembled unit by inserting the wood dowels (C) into the wood
dowel holes and inserting the cam bolts (A) into the cam lock holes on the side panels (2) and (3).
3. Insert 2 cam locks (B) into the cam lock holes on the side panels (2) and (3), then rotate clockwise
to secure the cam bolts (A) in place.
4. Repeat above steps to assemble the top board (1) to pre-assembled unit.
