Idiomas disponibles
Idiomas disponibles
General description
An illustration of the most im-
portant functional components
can be found on the fold-out page.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Device (2-part)
• Additional handle
with spare brush storage
• 1 x metal brush
• 1 x nylon brush
• Instruction Manual
Functional description
The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, there are two different brushes
which can be used for cleaning joints and
surfaces.
The telescopic arm enables comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.
Survey
1 Handle
2 On/off switch
3 Switch lock
4 Handle screw, additional handle
5 Screw socket for length adjustment
6 Telescopic arm
7 Splash guard
8 Motor head
9 Guiding roller
10 Additional handle
10a Spare brush storage
11 Narrow metal brush
12 Narrow nylon brush
13 Rechargeable battery
14 Charger
15 Screw sleeve
16 Screw
17 Brush support
Technical data
Cordless
Patio Brush 20V ....... PFBA 20-Li A1
Motor voltage ............................. 20 V
Protection category...........................IPX0
Idling speed n
.................... 1200 min
max
Weight (without accessories) ....... ca. 2 kg
Weight (accessories only) ............ 0.25 kg
Sound pressure level
(L
) ................... 64.7 dB(A); K
pA
Sound power level (L
measured .......... 76.5 dB(A); K
guaranteed ........................... 80 dB(A)
Vibration (a
)
h
additional handle .0.6 m/s
handle ............. .0.7 m/s
This device can only be operated with the
following rechargeable batteries:
PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1.
This type of battery may be charged
with the following chargers:
PLG 20 A1, PLG 20 A3, PLG 20 A4,
PLG 20 C1, PLG 20 C3, PDSLG 20 A1,
Smart PLGS 2012 A1.
An up-to-date list of battery com-
patibility can be found at:
www.lidl.de/akku
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
GB
IE
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1,5 m/s
2
; K= 1,5 m/s
2
-1
2
2
19
