Intellinet Network Solutions 510530 Instrucciones página 4

Power
Plug the power adapter into the 5 V DC input jack on
the media converter, then connect it to a regular power
outlet. Only use the included power adapter or one with
matching specifications (output of 5 V DC, at least 1 A).
Status
Link/Act (TP = RJ45; FX = Fiber)
FDX/COL (for TP/RJ45)
SD (for FP/Fiber)
For specifications, go to intellinet-network.com. To register
your product warranty, go to the weblink or scan the QR code for
your model, which you can find on the cover of this manual.
4 English
LEDs
PWR
1000M
100M
Description
The power adapter is
connected when lit.
1000 Mbps link on the twisted
pair connection when lit.
100 Mbps link on the twisted
pair connection when lit.
Active link when lit; data
traffic when flashing; no active
network link when unlit.
Full duplex connection when lit;
data collisions when flashing;
half duplex when unlit.
Fiber optic signal is detected
when lit; no signal when unlit.
Instructions