Cambium Networks cnVision Serie Guía Rápida página 6

Safety
•
cnVision devices and mounting structures must be properly grounded to protect against lightning. It is the
user's responsibility to install the equipment in accordance with national regulations. It is recommended that
installation be contracted to a professional installer.
•
Always use the specified cnVision platform power supply units (PSU) to power the equipment. Failure to use
the specified Cambium supplied PoE could result in equipment damage and may cause a safety hazard.
•
Structures, equipment, and people must be protected against electrostatic discharge:
─
by siting equipment in a lightning protection zone
─
by installation of appropriate lightning conductors to conduct the surge current to ground via a separate
preferential solid path.
•
The enclosure may be hot to the touch when in operation.
•
Safety may be compromised if outdoor rated cables are not used for connections that will be exposed to the
outdoor environment. Install Cambium recommended cables.
Attention This product meets the UL/cUL 62368 / IEC 62368 edition 2 specification,
and the radio housings are designed to be raintight.
Attention All RJ45 Ethernet LAN cables used for providing power or are connected to
power ports (PoE) must be UL certified with VW-1 markings.
Power Supply
The power supply unit that is connected to the ePMP modules is rated for indoor use. The cnVision modules are
installed outdoors and terminated to network equipment using Cat5e cables with RJ45 connectors. The Cat5e
cables are plugged into an AC or DC power supply to inject Power over Ethernet (PoE) into the module. The
Cat5e cables connected to the power supply transitioning from indoors to outdoors must be rated for outdoor
use.
Attention This product is intended to be supplied by a UL Listed Power Supply Unit
marked "LPS" or "PS2" and providing power over the Ethernet (PoE)" supply.
cnVision SERIES QUICK START GUIDE
6