Maxvac Dustblocker 700 Instrucciones De Uso Y Mantenimiento página 6

CAUTION
These instructions are intended for the MAXVAC Dustblocker 700.
Dustblockers can only be used for filtering dry, non-explosive dust.
Dustblockers cannot be used in moist rooms or rooms where an explosion
hazard may exist.
Only connect to 230V, check if this matches your network. Do not use this
machine with 110V.
MAXVAC cannot be held liable if the Dustblocker is used for other applications or
if the Dustblocker is not used in accordance with this manual.
GENERAL
When removing the packaging, please check whether the Dustblocker 700
has been damaged during transport.
Damaged cables that have been bent or torn, can be dangerous during use
of the device and must be replaced immediately in order to prevent personal
injuries.
In order to prevent personal injuries and property damages you must place the
device on a sturdy foundation, so that the Dustblocker 700 cannot fall over.
Make sure you keep fingers clear when opening and closing the machine filter
housing.
In order to prevent a risk of explosion, you should not place the device in a room
that may contain explosive gasses.
6
DB 700 MAX-VAC.COM