Function Operation; System Setup - Premier SX-4824TVD Manual De Instrucciones

Indicator light (CH):
When the battery is charging, the light is red. After charging, the light is green.
Power indicator light is blue.

FUNCTION OPERATION

Use and maintain the battery:
※ the normal working temperature: 0 -45
※ it is normal if the unit is hot during playing.
※ Please put the unit far away from heat source and damp place, and avoid to crash.

SYSTEM SETUP

Press SETUP button to go to the setup menu. There are GENERAL, AUDIO SETUP, VIDEO SETUP
and PREFERENCE. You can use direction buttons, PLAY button and ENTER button to change the
setup, and it will be effective immediately. Press SETUP button or direction key to return to the previous
menu when it shows dialogue window.
In DVD mode, press SETUP button to enter into the menu, it shows all of options, but initial setup can be
setup when the disc is stopped or the drawer is open.
1. GENERAL (e.g. Photo2)
10. TV mode:
Normal/Full View: When the unit is connected with TV set, wide screen image will be fully showed
according to the ratio, but left part and right part is cut.
Normal/Mailbox: When the unit is connected with TV set, wide screen image will be fully showed
according to the ratio, but there is black belt on the top and bottom side.
Wide screen: When the unit is connected with TV set, wide screen image will be fully showed according
to the ratio, but 4:3 image will be stretched from horizontal direction.
11. Angle mark
Angle open: when playing DVD with multi angles, the screen will show the angle mark.
Angle close: no angle mark on the screen.
12. OSD language: to setup the menu language.
13. Screen saver
Open: when the unit is on stop state, the screen saver function will be active after few minutes. You can
press any key to wake up the unit.
Close: to turn off this function.
14. Last memory setup
Open: when you turn off the unit or stop playing disc, the unit can keep memory of the last playing point.
When you turn on the unit and play the same disc again, the system will start to play from the point.
Close: to turn off the function.
2. AUDIO SETUP (e.g. Photo 3)
P-9