Leatt Z Frame JNR Manual Del Usuario página 7

Idiomas disponibles

Fig.1 (p.2) - Sleeve Fitment:

Fit the inner knee sleeve provided with your brace, note the right/left indicator on

the sleeve for correct fitment, with the Leatt logo centered over your knee cap.

Fig.2 (p.2) - Knee Brace Positioning

Fig.3 (p.3) - Strap Adjustment:

Start with strap 1 and work your way through to strap 4, adjust and fit to a

comfortable tolerance, making sure the fittings are correctly clipped into the

body of the Z Frame Brace.

When fitting the calf straps, always make sure the top strap is positioned

above the calf to prevent the Z Frame Brace from sliding down your leg.

Fig.4 (p.4) - Knee adjustment:

Additional spacers supplied to adjust pressure point inside knee.

Fig.5 (p.4-5) - Angle Adjustment:

The degree spacers provided allow you to change the angle of the brace to

provide various degrees of lockout. The brace must first be bent/angled for

the stopper to be removed. Make sure you use the same spacer for the inner

and outer hinge.

Fig.6 (p.5) - Sleeve Fold Over:

Once the Z Frame Brace is in place and the fitment feels comfortable, fold the

top and bottom of the sleeve over the brace making a secure fit.

This also decreases the chance of the pants catching on the Z Frame Brace

whilst riding.

Fig.7 (p.5) - Size Padding Adjustment:

Exchange padding to adjust for tighter fit.

Corporation