Idiomas disponibles
Idiomas disponibles
Setting the time
During any mode, press the CLOCK button
(20) for setting the time. The numbers blink
in this order: hour> minute> date> month>
year. Press the
to set each value. Press the Play /Pause button
(13) to switch to the next setting .
To save the time settings press the Clock
button again. If you don't press it again and
don't press any other button for 10 seconds,
the procedure is interrupted and the changes
you made are discarded.
Setting the volume (FIG. G)
To increase volume rotate the volume knob
(12) clockwise. To reduce it, turn the
to the left.
Briefly press
button (19) to set the mute
ON. Briefly press mute button again or rotate
the volume button (12) to set the mute OFF.
Sound adjustment (FIG. H)
To switch the bass playback on or off:
Briefly press the BASS button (17). When the
function is on, the BASS symbol lights up.
Selecting the operating mode
(FIG. I)
Briefly press the MODE button for selecting
the operating mode until the desired mode is
displayed.
The following operating modes are available:
Radio reception DAB
Radio reception FM
Playback of music sources connected
via Bluetooth
®
Playback of music sources connected
via AUX cable
The selection is shown by means of the
corresponding symbol on the top of the
display.
Bluetooth operating mode (FIG. J)
Set the Bluetooth
®
MODE button for selecting the operating
mode or press Bluetooth button (18).
Activate the Bluetooth function of the device
to be connected (mobile phone or similar)
and select "RD10.8/18.0/230" as the target of
the Bluetooth connection. For this purpose,
follow the instructions in the operating
manual of the paired device (smartphone or
similar).
18
or
button (10a or 10b)
operating mode with the
Single press
previous or next song.
Press
button to pause or play.
NOTE
To separate the Bluetooth connection after
successfull pairing, press the
and hold for 3 seconds. The connection is
separated.
AUX operating mode: IN/OUT (FIG. K)
Set the AUX operating mode with the MODE
button for selecting the operating mode.
Release the AUX IN connector from the
soft cover and connect with the external
knob
music source (MP3 player or similar). Switch
on the external music source and start the
playback. Set the volume with the regulator
for the external music source or the volume
regulators of the Radio.
Release the AUX OUT connector from the
holder and connect with the external speaker
or headset. Switch on the device and audio
will be output to the external speaker or
headset.
NOTE
Batteries of the connected devices cannot
be charged via the AUX connection.
When the Radio is switched off, connected
devices are not switched off.
After using AUX or USB connectors put
on the soft covers to protect them against
dust, dirt or moisture.
Charging external devices via the
USB connection (FIG.L)
Insert the USB plug of the device to be
connected into the USB port of the Radio.
The USB power output port (6) is a connection
port for powering low power devices such as
mobile phones, CD and MP3 players.
Immediately separate the USB connection if
no longer required.
NOTE
No music playing available via USB
connection.
DR18VC0
or
button to change to
button
