Envirolite EV7063-305 Manual De Instrucciones página 4

INSTALLATION
1
 Thread the fixture mounting screws
(FF) into the provided holes of the
mounting bracket (GG).
 Thread the hex nuts (BB) onto the
fixture mounting screws (FF). Do not
tighten the hex nuts (BB) at this time.
 Pull the supply wires out from the
outlet box and mount the mounting
bracket (GG) to the outlet box using
the bracket mounting screws (EE).
 Place the back plate of the fixture body (A) over the outlet box and onto the
fixture mounting screws (FF).
 Adjust the fixture mounting screws (FF) until they protrude out from the back
plate 1/4 in.
 Remove the fixture body (A) and secure the position of the fixture mounting
screws (FF) by tightening the hex nuts (BB)
2
 Connect the black supply wire to
the black fixture wire using a wire
nut (DD).
 Connect the white supply wire to
the white fixture wire using a wire
nut (DD).
 Connect the fixture ground wire
to the supply ground wire using a
wire nut (DD).
 Wrap all wire connections with
electrical tape for a more secure
connection.
EE
FF
BB
NOTE: If you have electrical
questions consult your local
electrical code for approved
grounding methods.
A
4
GG
GG
DD