Lenco PDR-046 Manual Del Usuario página 12

connection port on the speaker using an audio cable (not included)
11.3. Music play
When you are playing music,
11.3.1. Press " (07)" or " (08)" button to adjust the desired volume
level.
11.3.2. Start or stop playback on the playback device.
12. Troubleshooting
If a fault occurs, first check whether you can resolve the problem yourself.
You might find this overview useful.
CAUTION!
Risk of injury!
Opening the device can cause injuries.
Fault Possible cause/action
No function - If the device has been disrupted by a
thunderstorm, a static charge or another external
factor, follow this procedure to resolve the
problem: Power off this device and power on it
again 10 seconds later.
No sound - The volume may be set too low or in mute mode.
- In Bluetooth / AUX in mode: Set the volume of the
external device to the maximum and then control
the volume by using "
- If necessary, select another location to improve the
No/bad radio
radio signal.
reception
- Adjust the telescopic antenna to optimize the radio
reception.
No Bluetooth® - Take care to ensure that all settings have been
connection made correctly on all devices. The Bluetooth®
function may be deactivated on the external
device. (re) activate it, if necessary.
- Check whether the device to be connected is
switched on and is in search mode.
Device freezed - Take use a small paperclip and insert it carefully
(no reaction on into the reset hole on the back until you feel a click.
buttons/screen) This will do a soft reset. (all presets and setting will
remain).
13. Specification
Device: Portable Bluetooth DAB Radio
Unit Dimension 180 (L) *55mm (W) *68mm (H)
Unit Weight 407g
(07)" or " (08)" button.
12
Display Type
Size
Bluetooth Specification
Supported Profile
Connection Distance
Power
DAB Tuning Range
Preset Memory
FM Tuning Range
Stereo/Mono
Preset Memory
Antenna
Audio Output Power Output Power
Freq. Responses
Power Source Input TYPE-C USB Port
PC's USB port Power or DC 5V, 2A
Built-in-Battery Lithium-ion 3.7V 2500mAh
Operating Temperature 0-40°C
Guarantee
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period) you
should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from the
description made in this manual.
TFT color Display
2.4inch
V5.0
A2DP, AVRCP, HSP
In 10 meters (open
area)
Class II
Band III; 174.928MHz
– 239.2MHz
30 stations
87.5 - 108MHz
Selectable
30 stations
telescopic type
2 x 3 W RMS
80Hz to 16, 000Hz