Technical Specifications - fluidra iQBridge RS Guia De Instalacion

TECHNICAL SPECIFICATIONS

Dimensions
Power supply - Input
Weight
Cable length
Wi-Fi
Bluetooth®
Radio
Protection rating
Ambiant temperature
INSTALLATION
1 - Mount the iQBridge RS
• Use the installation kit (provided) to mount the iQBridge RS on
the wall using the screws (close to the device it will be connected
to) or directly the device that it will be connected to using the
double sided tape.
2 - Connect the iQBridge RS
Disconnect the device that will be connected (heat
pump, salt water chlorinator, etc.) from the main power
supply before connecting the iQBridge RS.
100 mm x 100 mm x 30 mm
12V DC - 180mA
200g
1 m
802.11 b/g/n, max power : 100 mW
BLE V4.2, 2.4 GHz, max power 100 mW
Bande 2.4 GHz, max radio power - Wi-Fi
+20dBm / BLE +9dBm
IP54
Ta 40°C
E N
5