Idiomas disponibles
Idiomas disponibles
-
This device is equipped with a user absence sensor in order to
make it easier to detect the absence of the user in the room, avoid
installing the device in narrow corner or behind furniture.
Do not install the appliance (see page 2, 3)
-
In a draught that could affect its adjustment (beneath a
centrally-controlled mechanical fan unit, etc.).
-
Underneath a fixed mains socket or near curtains or any other
flammable materials.
-
In area 1 of the bathroom.
-
The air outlet grid and control unit must be visible at the top of
the appliance. It is forbidden to mount a vertical device horizontally
and vice versa.
Your model can be installed both in portable (mobile) and wall
mounted version.
Portable (mobile) version
-
CAUTION: the appliances which are not equipped with plug
cannot be used in mobile version (with feet kit).
-
The appliance must be placed on a horizontal surface. Please
refer to the installation instructions on page 4 of this booklet or to the
instructions
0517550/0517300/0517400 (not supplied, tu buy separately).
-
CAUTION: When moving the device with a full humidifier, do
not tilt the appliance to avoid water leaking from the tank.
-
In case of falling down or leakage from the humidifier, it is
recommended to disconnect the device from the power supply,
remove water from the external surfaces of the device and leave it to
dry for 24 hours.
-
Do not use the device in rooms with a small space if they
contain persons who are unable to leave the room on their own,
unless they are under constant supervision.
Wall mounted version (see page 5)
-
For the better effect of heating, it is recommended to install the
device at a height of 1 m from the floor level or under the window
slits. To ensure normal circulation of the air flow and of the water mist
from the humidifier, it is not allowed to cover the convector with
furniture and other objects closer than 0.8 m.
attached
to
the
feet
kit
art.
0517000/
EN
9
