Idiomas disponibles
Idiomas disponibles
Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical
shock. Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet
(220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit
in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of
sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he
should read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic
attacks should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F
and 35°C/95°F.
All manuals and user guides at all-guides.com
ENGLISH
- To prevent accidents in companies, you must follow the
- Secure the unit with an extra safety chain if the unit is
- This unit contains high intensity LEDs. Do not look into
- Do not repeatedly switch the fixture on and off. This
- Keep the unit out of the reach of children. Do not leave
- Do not use cleaning sprays to clean switches. The
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
- Do not use chemicals to clean the unit. They damage the
- Keep away from electronic equipment that may cause
- Only use original spares for repairs, otherwise serious
- Switch the unit off prior to unplugging it from the mains
- Make sure that the mains lead cannot be damaged when
- The mains voltage is 220-240Vac/50Hz. Check if power
- Keep the original packing material so that you can
applicable guide lines and follow the instructions.
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material and
leave at least 1 meter space on every side to ensure
sufficient cooling.
the LED light to prevent damage to your eyes.
shortens the life time.
the unit unattended.
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
qualified technician before you switch the unit on again.
varnish. Only clean the unit with a dry cloth.
interference.
damage and/or dangerous radiation may occur.
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
people walk on it. Check the mains lead before every
use for damages and faults!
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
transport the unit in safe conditions
