Idiomas disponibles
Idiomas disponibles
English - Description
The ultrasonic humidifier is a device designed to increase the humidity in a single room. Ultrasonic humidifiers use high-frequency technology which sends off a vibration to
the water. The water vibrates to move in tune with the vibration, breaks down into microscopic droplets and then transforms into vapour. The device releases the mist into the
room, which almost instantly creates a cooler, more humid environment.
It is recommended to use the device in rooms with a temperature below 20 °C and a relative humidity lower than 80%. The device can be used in rooms with a temperature
between 0 °C and 40 °C and a relative humidity lower than 90%.
•
•
•
1.
Water tank
•
2.
Water tank cover
•
3.
Nozzle
•
Note: If there is not enough water in the water tank, the device will stop automatically. Refill
the water tank with water and the device will start operation again.
•
4.
On/off button
•
5.
Timer button
•
•
Note: If the desired relative humidity is less than the current relative humidity, the machine
6.
Humidity button
will enter sleep mode. The temeparture/humidity display shows the current humidity. Touch
Night mode button
the button to view the expected humidity setting on the display.
•
•
•
7.
Mist output button
•
•
•
8.
Plasma button
•
•
9.
Light button
10. Timer display
•
11. Manual-mode indicator
•
12. Plasma indicator
•
13. Automatic-mode
•
indicator
14. Temperature/
•
humidity display
•
•
15. Night mode indicator
16. Refill indicator
•
17. Power indicator
•
18. Remote control
Remove the water tank from the device.
Remove the water tank cover from the water tank.
If necessary, clean the water tank and the water tank cover with water.
Fill the tank with clear water (max. 40 °C).
Put the water tank cover on the water tank. Make sure that the nozzle is correctly placed
on the water tank cover.
Place the water tank into the device.
Touch the button to switch on the device in automatic mode.
Touch the button again to switch off the device.
Touch the button to set the timer (1-12 hours).
Touch the button to increase or decrease the relative humidity by steps of 5%.
Touch the button again to exit the humidity setting mode.
Touch and hold the button for 2 seconds to enter night mode.
Touch and hold the button for 2 seconds again to exit night mode.
Touch the button to exit the automatic mode and set the mist output (3 levels).
Touch the button again to go back to automatic mode.
Touch the button simultaneously with the humidity button to decrease the humidity.
Touch the button simultaneously with the timer button to decrease the set time.
Touch the button to start the plasma function.
Touch the button again to stop the plasma function.
Touch the button to set the brightness of the blue decoration light in the base element
and the water tank indicator (bright, dimmed or off ).
The display shows the remaining operation time.
The indicator indicates that the device is in manual mode.
The indicator indicates that the plasma function is activated.
The indicator indicates that the device is in automatic mode.
The display shows the current mist temperature.
The display shows the current humidity.
The indicator indicates that the device is in night mode.
In night mode, the blue lights and the display are not illuminated.
The indicator indicates the water tank is empty and must be refilled with water.
The indicator is on when the device is on.
2
