Idiomas disponibles
Idiomas disponibles
DESCRIPTION
Hold any key pressed to activate the keypad: a
long beep signals its successful activation.
Buzzer deactivation (*1)
Ambient light sensor activation (*1)
Firmware revision
(*1) Carry out the same procedure to restore the default setting
5.2 - CONFIGURATIONS PROTECTED BY A MASTER CODE
To change a parameter protected by a master code, proceed as per the example below: setting the
colour magenta (0025) for the key and border backlighting
DESCRIPTION
Hold any key pressed to activate the keypad: a long beep
signals its successful activation.
Press and hold the
beep is emitted and until the keypad lighting remains blue
Key in the master code followed by the
Change the colour of the backlighting to magenta
Repeat the previous sequence
Repeat the sequence using the codes shown in the table below to change other optional configurations.
DESCRIPTION
Backlight brightness
Backlight colour 0020
0022
, 0023
(green)
, 0026
(magenta)
(cyan)
Restore factory setting
6 - DELETING CODES
6.1 - DELETING A SINGLE USER CODE
To delete a single user code, proceed as follows:
DESCRIPTION
Hold any key pressed to activate the keypad: a long beep
signals its successful activation
Press and hold the
beep is emitted and until the keypad lighting remains blue
Key in the master code followed by the
Press
followed by the user code to be deleted, followed
by
Repeat the previous sequence
6.2 - DELETING ALL USER CODES
To delete all user codes, proceed as follows:
10
and
keys simultaneously until a long
, 0021
(none)
(red)
0024
, 0025
(blue),
(yellow)
, 0027
, 0028
(white)
and
keys simultaneously until a long
CODE
001
001
0017
key
CODE
0010
,
0028
(orange)
0011
key
DEFAULT
BLUE
ACTIVE
EXAMPLE COLOUR
+
5 sec.
max
ORANGE
1 2 3 4
0 0 2 5
YELLOW
0 0 2 5
DEFAULT
HIGH
BLUE
(orange)
EXAMPLE COLOUR
+
5 sec.
max
ORANGE
1 2 3 4
1 1 1 1
YELLOW
1 1 1 1
MASTER C.
> 1 s
NO
NO
BEEP
> 1 s
BLUE
BLUE
> 1 s
+
> 1s
> 1s x3
+
> 1s
GREEN
MASTER C.
YES
YES
YES
BEEP
> 1 s
BLUE
BLUE
> 1 s
+
> 1s
> 1 s x 3
+
> 1s
GREEN
