Idiomas disponibles
Idiomas disponibles
1. Remove the paint tank (1);
2. Align the suction tube;
If the suction tube is correctly positioned, the entire tank
content can be sprayed. When working with horizontal
objects: Turn the suction tube forwards (A). When spraying
suspended objects: Turn the suction tube backwards (B).
3. Fill the paint tank and screw it to the front of the gun;
4. Assemble the front part with the rear part;
5. Plug in the power cord (8);
6. Press the trigger (2) and spray a test area to check spray
pattern and paint flow rate;
7. Adjust spray pattern and flow rate according to the work
you are going to do.
It is used to clean and blow out narrow spaces and can also
be used to fill air mattresses and pillows, children's toys,
balloons, etc.
When performing maintenance or cleaning tasks on the
paint sprayer, release the trigger and unplug the power
cord.
Do not attempt to unclog or clean the nozzle by hand. Do
not use a needle or other sharp object to clean the nozzle.
If the spray pattern becomes distorted or stops completely
while the gun is triggered, follow these steps:
1. Turn the paint sprayer and unplug the power cord (8);
2. Loosen the nut (3) and remove the nozzle cap (4);
3. Remove the nozzle and use the cleaning accessories
supplied to unclog and clean;
4. Refit the nozzle to the gun, place the cap and tighten the
nut;
5. Plug in the power cord and press the trigger (2) on a test
area to check that the nozzle is already clear.
This filter should be checked every time you use the paint
sprayer and cleaned whenever necessary so as not to
restrict the proper operation of the machine.
To do this, remove the air filter cover (5) from the machine
and remove the filter from the cover. Wash it or blow out
with low pressure compressed air.
