CommScope Andrew GKT-F4A Instrucciones De Instalación

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Jacket Stripping Tool
for LDF and VXL Style Cables
NOTE. The cable must be straight before using the tool.
CAUTION. Be careful when handling the Jacket Stripping
Tool to avoid accidental contact with the cutter blade.
NOTA. El cable debe disponerse rectilíneo antes de utilizar
la herramienta.
PRECAUCIÓN. Tener cuidado al manejar la Jacket Stripping
Tool (herramienta desforradora) para evitar un contacto
accidental con la cuchilla de corte.
NOTE - Vérifier que le câble est droit avant d'utiliser l'outil.
ATTENTION - Prenez soin d'éviter tout contact accidentel
avec la lame lorsque vous utilisez cet outil.
+7(495)109-02-08 [email protected] www.bbrc.ru +7(495)109-02-08 [email protected] www.bbrc.ru
Part number
GKT-F4A
GKT-114A
GKT-158A
Note: These tools are designed for use with CSGL-series & SGL-series
grounding kits. GKT-series tools remove 2.25" of jacketing and accommodate
SGL-series grounding kits.
Part number
GKT-L4SG
GKT-78SG
GKT-114SG
GKT-158SG
Note: These tools are designed for use with SG-series & CSG-series grounding
kits. GKT-SG series tools remove 1.5" of jacketing and accommodate
SG-series grounding kits.
Andrew Institute offers installation training.
Nominal cable size Replacement blade kits
1/2"
GKT-58A 5/8"
GKT-L4A 1/2"
GKT-78A 7/8"
1-1/4"
1-5/8"
Nominal cable size Replacement blade kits
1/2"
7/8"
1 1/4"
1 5/8"
HINWEIS: Das Kabel muss gerade sein, bevor Sie das
Werkzeug benutzen.
VORSICHT: Gehen Sie vorsichtig mit dem
Abmantlungswerkzeug um, um Verletzungen durch Berühren
der Klinge zu vermeiden.
NOTA. Prima di utilizzare l'attrezzo occorre raddrizzare il
cavo.
ATTENZIONE. Nel maneggiare lo spelacavo fare attenzione
ad evitare il contatto accidentale con la lama dell'attrezzo.
NOTA. O cabo deve estar reto antes de se usar a
ferramenta.
ATENÇÃO. Tome cuidado ao manusear a Ferramenta que
retira a capa do cabo para evitar contato acidental com a
lâmina de corte.
Bulletin 237663 Revision D
GKT-BKF4A
GKT-BK58
GKT-BK512
GKT-BK512
GKT-BK67
GKT-BK67
GBK-SG1278
GBK-SG1278
GBK-SG114158
GBK-SG114158
Page 1 of 2