Getting Started - Wabi Baby WA9900N-PT Manual Del Usuario

GETTING STARTED

All baby feeding objects intended for sterilizing must be washed clean with soapy water, and completely rinsed
with fresh water thoroughly. Shake off any excess water to maximize the drying efficiency.
1. 2. 3.
Wash with detergent Rinse thoroughly Shake off excess water
For all other objects or electronics, please refer to each individual object's user manual for cleaning instructions
before placing them inside the sterilizer. Please, consult with the manufacturers if you are unsure of its durability
to UV light and heat.
Tip: Can I sterilize this? This question is really directed to the object itself and not the sterilizer. Please make
sure to check the care instructions for the individual objects you intend to sterilize, make sure they can stand UV
exposure and medium heat environment. For feeding items, if they can be dish-washed, there should be
no problem sterilizing them.
LET'S DO IT
There are really only two steps on this appliance. Load the objects and select the desired function.
LOADING OBJECTS
Load all bottles on the upper shelf standing with the opening facing upward
and all nipple and small accessories on the bottom basket. Spread out the
objects to allow spaces in between. Do NOT stack objects, all items must be
properly exposed to UV light to achieve the full sterilization effect.
1. Shake off excess water 2. Opening face upward 3. Keep good distance
4. All objects disassembled and larger opening face upward.
6