Idiomas disponibles
Idiomas disponibles
● Power supply: Connect to DC 12V/24V or AC 100-240V (using the adapter) power
supply.
● Display screen: The screen will be on for two seconds after connecting to the power
supply.
● Power ON/OFF: Press
● Unlocking: Hold
● Temperature setting: press
automatically. Note: The appliance will take some time to reach the temperature
displayed. Temperature setting range: -20-20 °C.
● Cooling mode: When on, press
saving mode). Factory setting is MAX.
● Battery protection mode: When on, hold
Then press
again to select the protection mode H (high) M (medium) or L (low).
Factory setting is H.
● The voltage is theoretical, it may vary in different scenarios.
● H should be set when the product is connected to the car. M or L should be set when it
is connected to a portable or back up battery.
● Temperature unit setting: Switch off the fridge, hold
dislplays, keep pressing
Fahrenheit. Factory setting is Celsius.
to switch on. Hold
for three seconds to unlock.
or
for temperature settings. The setting will be saved
to switch to MAX (fast cooling) and ECO (energy
until E5 displays. Then press
for three seconds to switch off.
for three seconds until the screen flashes.
for three seconds until E1
or
(power supply end)
to select Celsius or
