Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

GENERAL INFORMATION
This remote control is designed to separately control your ceiling fan
speed and light brightness.
● The fan button will control the fan speed. (1 - LOW, 2, 3, 4 - High)
● Select "D" or "O" in the frequency switches to control the light
dimmer or ON/OFF function based on your light bulbs.
● The red indicator on the transmitter will light when the button is
pressed.
INSTALLATION AND OPERATING
INSTRUCTIONS
1. INSTALLING RECEIVER IN THE CEILING FAN
A. Safety precautions:
WARNING: HIGH VOLTAGE! Household electrical power can
cause serious injury or death. Disconnect the power to the ceiling
fan by removing the fuse or switching the power off at the circuit
breaker.
B. Installing receiver in fan.:
1. Remove the ceiling fan canopy from the hanger bracket. (Fig. 1)
2. Disconnect the existing wiring between the ceiling fan and
supply at the electrical junction box. (Fig. 1)
3. Lay the black antenna wire on top of the receiver, and put the
receiver in the mounting bracket. (Fig. 1)
4. Make the connections as follows, using the wire nuts supplied:
(Fig. 2)
a. Make wire connections from the fan to the receiver unit.
● Connect one BLACK wire from the fan to BLACK wire from
the receiver.
● Connect one BLUE wire from the fan to BLUE wire from the
receiver.
● Connect one WHITE wire from the fan to WHITE wire from
the receiver.
● Connect one ORANGE wire from the fan to ORANGE wire
from the receiver.
● Connect one GREEN wires from the fan to ground wire (green
or bare copper) from the ceiling.
b. Make wire connections from the receiver to the ceiling.
● Connect one BLACK wire from the fan to BLACK wire from
the ceiling.
● Connect one WHITE wire from the fan to WHITE wire from
the ceiling.
If there are wires with different colors, have this unit installed
by a qualified electrician.
5. Push all connected wires up into junction box.
6. Reinstall the canopy on the hanger bracket.
7. Restore the electrical power.
4 SPEED FAN & LIGHT REMOTE CONTROL
INSTALLATION INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
NOTE: When installing the remote control, be sure the
Hanger
light switch is set to the ON position.
bracket
Receiver
Wire nuts
Fig. 1
House
supply
wire
Receiver
Fig. 2
WITH SMART RECEIVER
Model: 980016
Screws
Canopy
House
supply
wire
Outlet box
Ceiling
RECEIVER
Fan
Tabla de contenido
loading

Resumen de contenidos para Hinkley HIRO 980016

  • Página 4: Información General

    CONTROL REMOTO DE 4 VELOCIDADES Y VENTILADOR CON INSTRUCCIONES DE INSTALACIÓN DEL RECEPTOR INTELIGENTE Modelo: 980016 LEA Y GUARDE ESTAS INSTRUCCIONES INFORMACIÓN GENERAL NOTA: Al instalar el control remoto, asegúrese de que Hanger Este control remoto está diseñado para controlar por separado la el interruptor de la luz esté...
  • Página 5: Proceso De Emparejamiento Remoto Nota

    Si la señal es débil y no funciona el ventilador desde una distancia Para obtener información sobre la garantía, visite inferior a 30 pies, intente reposicionar el cable de la antena dentro de la www.hinkley.com cubierta del ventilador para una mejor recepción.
  • Página 6: Control Remoto Wifi De Ventilador De Techo Inteligente Instrucciones De Instalación Y Operación

    CONTROL REMOTO WIFI DE VENTILADOR DE TECHO INTELIGENTE INSTRUCCIONES DE INSTALACIÓN Y OPERACIÓN SMART PHONE instalar agregar dispositivo 1. Instalar con la APLICACIÓN WIFI R. Para disfrutar de todo el potencial de su nuevo dispositivo, deberá descargar la aplicación BOND HOME, disponible en Google Play Store y Apple App Store B.

Este manual también es adecuado para:

Hiro 980016fwh-019

Tabla de contenido