Idiomas disponibles
Idiomas disponibles
Manufacturer's Declaration – Electromagnetic Immunity
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50 % duty cycle square wave signal.
c) As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while
it does not represent actual modulation, it would be worst case.
CAUTION: If abnormal behavior is observed due to EM disturbances,
please relocate the device accordingly.
CAUTION: Please do not use any other cables or accessories not approved
by the manufacturer in this manual to avoid negative influence on
electromagnetic compatibility
Symbols Used
Type BF
Protection against electronic
shock, type of applied part,
body floating
Class II Equipment
SGS Certified
Waste Disposal
Protection against ingress
IP22
of solid foreign objects and
fluids.
Caution, Consult
accompanying documents
Test specifications for ENCLOSURE PORT IMMUNITY to
RF wireless communications equipment (cont)
Follow Instructions for Use
Lot Number
Ex. 864YYMMXXXX
Serial Number
Catalogue Number
Alternating Current
24
