Idiomas disponibles
Idiomas disponibles
1 INTRODUCTION
Dear customer, we would like to start by saying thank you and congratulate you for having purchased our product.
To make sure you are using your new spiral mixer at its best performances level, please follow closely the indications in this
manual.
The rolling machine subject of this manual have been designed exclusively to meet the needs of pizza dough and similar
products production.
The destination of use described above, and the configurations envisaged for this equipment are the only ones permitted by
the Manufacturer: do not use the equipment other than according to the instructions provided.
The installation has to be performed by qualified personnel only, able to ensure the highest operation and safety conditions.
2 SAFETY WARNINGS
Safety warnings for the installer
Check that the prearrangements necessary for the installation of the rolling machine comply with the local, national and
European regulations
•
Follow the prescriptions contained in this manual.
•
Do not carry out loose electrical connections with temporary or not insulated cables.
•
Check to make sure the earthing of the electrical system is efficient.
•
Always use personal protection equipment and the other means of protection required by the legislation.
Safety warnings for the user
The environmental conditions of the rolling machine installation place must have the following characteristics:
•
It has to be dry;
•
The water and heat sources have to be positioned at a suitable distance;
•
Ventilation and adequate lighting system compliant to the rules of hygiene and safety foreseen by the laws in force;
•
The floor must be flat and compact to ease thorough cleaning;
•
No obstacles of any kind that could affect the normal ventilation of the rolling machine must be located near it.
In addition, the user must:
•
Prevent the access of children close to the rolling machine when it is running;
•
Observe the prescriptions contained in this manual;
•
Not remove or tamper with the safety devices of the rolling machine;
•
Always use caution, meaning monitoring the process and do not use the rolling machine when distracted;
•
Follow the instructions and warnings highlighted by the plates applied on the rolling machine.
The plates are accident-preventing devices, therefore they must always be perfectly legible. If damaged and unreadable,
it is mandatory to replace them, requesting the original spare to the manufacturer.
•
Disconnect the mixer from the power supply after each use and prior to any cleaning and maintenance operation.
Safety warnings for the maintenance operator
Follow the prescriptions referred to in this manual:
•
Always use the personal protection equipment and the other means of protection.
•
In case even one of the safety devices is incorrectly adjusted or not working, the rolling machine is to be considered
faulty.
•
Remove the power supply prior to working on electrical, electronic parts and on connectors.
18
