Idiomas disponibles
Idiomas disponibles
Troubleshooting
AMPLIFIER DOES NOT TURN ON:
• Verify that the cables are connected correctly. Make sure all connections
have electrical and mechanical contact.
• Fuses or circuit breakers may be defective or blown. Check the condition of
the circuit breakers and if it is compatible with the equipment consumption.
• Verify that the battery charge is sufficient for the operation of the product.
NO SOUND:
• The cables of the speakers or RCA plugs may not be connected correctly
or are defective.
•
Verify
that
NOISE AND FAILURE IN SOUND:
• Verify that the installation is not close to the original vehicle wiring as they
may cause interference and noise in the audio signal.
• Make a separate power connection to the sound system. Use a fuse/
circuit breaker as close to the battery as possible for protection.
• Make a good grounding of the amplifier. To do this, remove the paint
from the vehicle chassis at the desired point. Screw the wire using a ground
terminal. To protect from oxidation, isolate with paint.
• Do not loop the ground. Avoid using multiple grounds. If possible, use a
star connection, in which all the grounds run
from a single point.
Any updates made in this manual will be available for costormers to consult without any
charge on the brand's site.
It is recommended that the updated manual be consulted whenever needed.
Images contained in this manual are merely illustrative and may differ from the actual product.
LEVEL
the
control
is
not
19
at
a
minimum.
