Briggs & Stratton PowerBoss 3250 Watt Handyman-Plus Manual De Instrucciones página 6

Add Oil
CAUTION!
Any attempt to crank or start the engine
before it has been properly filled with the recommended
oil may result in an engine failure.
To fill your engine with oil:
• Place generator on a level surface.
• Follow the oil grade recommendations and oil fill
instructions given in the engine owner's manual.
NOTE: The generator's revolving field rides on a
prelubricated and sealed ball bearing that requires no
additional lubrication for the life of the bearing.
Add Fuel
WARNING!
NEVER fill fuel tank indoors. NEVER
fill fuel tank when engine is running or hot. Allow
unit to cool for two minutes before refueling. DO
NOT light a cigarette or smoke when filling the fuel
tank.
WARNING!
DO NOT overfill the fuel tank.
Always allow room for fuel expansion.
• Use regular UNLEADED fuel with the generator
engine. DO NOT use premium fuel. DO NOT mix oil
with fuel.
• Clean area around fuel fill cap, remove cap.
PowerBoss 3250 Watt Handyman-Plus Generator
• Slowly add unleaded regular fuel to fuel tank. Be careful
not to overfill. Allow about 1.5" of tank space for fuel
expansion (Figure 3).
Figure 3 — Typical Fuel Expansion Space
• Install fuel cap and wipe up any spilled fuel.
IMPORTANT: It is important to prevent gum deposits
from forming in essential fuel system parts, such as the
carburetor, fuel filter, fuel hose or tank during storage. Also,
experience indicates that alcohol–blended fuels (called
gasohol, ethanol or methanol) can attract moisture, which
leads to separation and formation of acids during storage.
Acidic fuel can damage the fuel system of an engine while in
storage.
To avoid engine problems, the fuel system should be
emptied before storage of 30 days or longer. See "Storage"
on page 11. NEVER use engine or carburetor cleaner
products in the fuel tank or permanent damage may occur.
6
Tank
Fuel