Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A
Preview of the appliance
Description of the appliance
1
Cabinet
2
Drawer
3
Adjustable feet
4
Worktop
5
Thermostar Knob
4
EN
A
Preview of the appliance
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It's better that 2 people handle the unit during assembly.
•
This refrigerating appliance Is not Intended to be used as a built-in appliance.
1
unscrew
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place It on a soft pad to avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both sides.
unscrew
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
2
3
5
screw
5
EN
4
Tabla de contenido
Solución de problemas
