VICSONIC S7 Manual Del Usuario página 7

Instructions for use
Charging
During the working process of the machine, when the power of the LED display module shows
(1). Please use the charger that equipped with this machine for charging.
(2). Disconnect the power, then plug the adapter into the charging.
(3). The LED display module displays the real-time power, and the LED light on the battery pack
flashes, indicating that the charging is normal.
(3). The LED display module displays real-time power. The flashing LED light on the battery pack
indicates that the charging is normal.
(4). The LED display module shows 100%, and the LED light on the battery pack is always on and
stops blinking, it means that the charging is complete.
(5). When charging, press and hold this key (7d) for 5 seconds to turn off the charging atmosphere
light.
Real-time battery display
Warning:
1. Don't turn on the vacuum cleaner while charging! Do not remove the battery pack when
connecting to the host for charging!
2. The battery can only be charged at an ambient temperature between 0°C and +45°C. Excessive
heat or cold may prolong the time required for charging and even damage the battery.
3. The normal charging of this product takes 4-6 hours. It is best to perform 1-3 full charge and
discharge processes before the first use, so that the battery activity can be fully activated.
4. If the product is not used for a long time, it is recommended to fully charge and discharge the
machine once every 3 months or so, so as to avoid passivation of the battery electrodes due to
long periods of non-use!
Battery pack indicator LED lights
Charging port
5