Fronius CrashBox magnetic Manual De Montaje página 8

General
General
Scope of supply
Also required for
fitting to robot
arm
(1) (2)
The CrashBox magnetic is a safety device
used in robot welding. In the event of a col-
lision the CrashBox sends a signal to the
robot control, which stops the robot imme-
diately. The torch holder on the CrashBox
protects the welding torch from damage
should a collision occur.
The CrashBox magnetic is designed speci-
fically for fitting to the robot arm and for hol-
ding gas-cooled and water-cooled robot
drive units.
(1) CB magnetic holder
(2) Five M4 x 16 countersunk screws
(3) CB magnetic base plate
(3)
Depending on the particular robot:
- 1 x Robot flange
- Screws for fastening the flange
Refer to the spare parts list for robot flange
and screws
6