Setting Of Temperature; Setting Of Time - Westinghouse WBGLEG1201A18 Manual Del Usuario

5. Press the TEMP dial to start the oven.
6. Allow the oven to preheat until the set temperature reached, the preheating
time can vary between 0–60 minutes depending on the selected preset. Use
the detachable door can shorten the preheating time.
7. Use a pizza peel to place the pizza directly on the pizza stone.
8. Press the TIME dial to start the countdown timer.
9. At the end of the cooking cycle, the oven alert will sound and the TIME dial
lights will flash and then go out.
10. Remove your pizza and enjoy.

SETTING OF TEMPERATURE

1. Turn left-hand TEMP dial clockwise to raise the oven temperature, press the
dial to SET the desired temperature.
2. Turn TEMP dial counter clockwise to lower the oven temperature, press the
dial to SET the desired temperature.
3. Temperature set to 850F (Max Temp).
4. Press and the Temp dial and hold for 2 seconds to stop the heating, the device
will enter standby mode.
5. The oven temperature can be adjusted during the course by pressing the TEMP
dial, when the TEMP indicator flash, turn the dial to get your desired value and
press once to set.

SETTING OF TIME

1. Turn TIME dial counter clockwise to reduce the amount of the time on the
timer, or rotate to 0 to cancel, press the dial to SET desired time.
2. Turn TIME dial clockwise to increase the amount of the time on the timer,
maximal cooking time is 60 minutes.
3. Once the timer is complete, the oven stops heating and the device enter
standby mode.
4. Press the TEMP dial to start another cycle if needed.
EN
10
HOW TO USE