ATTENTION:
1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or other
heat sources. Ensure that the device is always installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the unit.
6. Observe the IP protection class as well as the ambient conditions such as temperature
and humidity according to the specification.
7. Devices can be constantly further developed. In the event of deviating information on
operating conditions, performance or other device properties between the user manual
and the device labelling, the information on the device always takes priority.
8. The unit is not suitable for tropical climates and for operation above 2000 m above sea level.
CAUTION:
Connecting signal cables can cause a lot of noise. Make sure that devices connected to the
output are muted when plugged in. Otherwise, noise levels may cause damage.
CAUTION: HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use.
The commercial operation of this device is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may
produce high sound pressure levels (SPL) which may cause hearing damage. Avoid exposure
to high volumes.
NOTES FOR MOBILE INDOOR DEVICES
1. Temporary operation! Event equipment is generally designed for temporary use only.
2. Continuous operation or permanent installation can impair the functioning
of the device and cause premature ageing.
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
The packaging content of the product MON 8 A G3 includes:
1x MON 8 A G3 powered coaxial stage monitor
1x Power cord
User manual
The packaging content of the product MON 10 A G3 includes:
1x MON 10 A G3 powered coaxial stage monitor
1x Power cord
User manual
7