Gemini GSM-100 Manual Del Usuario página 8

8
① Connect the microphone to a
computer via USB-C to USB cable. The
computer will identify the microphone
and complete the driver installation
automatically.
Driver settings:
2
Windows: Set the "Recording" device
"GSM-100" of the system speaker as the
default device.
Mac OS: Enter the sound settings under
the System Preference Device and select
"GSM-100" as the input device.
Connect a headphone or an active speaker to the 3.5mm port on the
3
back of the microphone for monitoring.
Open the video conference software, instant messaging software or
4
recording software for video conferences, voice chat, network
broadcasting, etc.
OTG Operation Instructions (Android /iOS)
Please note: You will need additional accessories to utilize the GSM-100's
OTG function.
Android: Standard USB-C cable
iOS: USB-C to Lightning cable (or adapter)
①Connect the microphone to phone or tablet via appropriate
cable/adapter. The phone/tablet will identify the microphone set as audio
input automatically.
②Open your recording app, microphone should be ready to use. You can
monitor Mic & Phone's audio from the GSM-100's headphone output.r
video conferences, voice chat, network broadcasting, etc.
USB Microphone
Sound
Recording Sounds Communications
Playbck
Select
a
recording
device
below
to
modify
its
settings:
Microphone
gemini GSM-100
Default
Device
FrontMic
Realtek
High
Definition
Audio
Ready
Configure Set
Default properties
OK Cancel
Sound
Sound
Effects






Output lnput
Select a d evice for sound input:
Name
Type
Built-IN
lntemal

Microphone
USB
gemini GSM-100
Settings for the selected device:
lnput volume:
lnput level:
Output volume: Mute
Show volume in menu bar
APPLY
Search
?