VERDER VP2-HT PH/RX Manual De Regulatión página 39

RX PROBE CALIBRATION
WARNING, make sure that the buffer solution used in the calibration correspond to the indicated value and that it is not
polluted.
Rev 1.1
All manuals and user guides at all-guides.com
Cod. 00.009.126
OFFSET CALIBRATION
Immerse the RX probe in the buffer solution.
Wait for the reading stabilization on the
display. Press ENTER / MENU for 3
seconds and then use the ▼ ▲ keys to
move the cursor to Calibration and press
ENTER twice. The current reading of the
probe is shown on the display. Press
ENTER and adjust (if necessary) the buffer
reading value with the ▼ ▲ buttons and
then confirm by ENTER.
39