Brew Monk 057.700.30 Instrucciones De Uso página 29

Step 2
You can adapt the overflow pipe according to the amount of malt recommended for your
recipe. For a large amount of malt you can use setup 1. For a small amount of malt you can
use setup 2.
Setup 1
Connect long pipe (E) to assembly
in step 1.
Step 3
Connect 2 handles (C) to the top malt screen (A).
Step 4
Connect 1 double female thread connector (F) to setup 1 or 2.
Step 5
Place assembly of step 3 on assembly of step 4 using 1 x short pipe (D) or 1 x long pipe (E)
according to chosen setup. Place 1 x single female thread connector (G) on top.
Instruction Manual Brew Monk - EN
Setup 2
Connect short pipe (D) to
assembly in step 1.
29