Description Of Operation; Foreseen Use - BIANCHI VENDING LEI600 Manual De Instalacion Y Mantenimento

5.0

DESCRIPTION OF OPERATION

Foreseen use

The automatic distributor is exclusively for the dispensing of drinks, pre-
pared mixing food substances with water (by infusion as far as concerns
espresso coffee).
For this purpose use products declared as suitable by the manufacturer for
automatic distribution in open containers. The drinks are made in specific
plastic cups automatically dispensed by the machine (Fig.5.1). Where fore-
seen, also the spoon for mixing the sugar is dispensed (Fig.5.2).
The drinks must be consumed immediately and in no case are to be kept for
subsequent consumption.
ESPRESSO COFFEE
This process functions only the models equipped with the coffee espresso
group (brass or plastic), after the cup and sugar dispensing processes have
been effected.
– the grinder is activated until it reaches the dose of ground coffee set by
the doser (Fig.5.3)
– the doser electromagnet is activated , causing the opening of the door
and consequent fall of the coffee into the brew chamber
– the rotation group geared motor brings it into the dispensing position and
simultaneously compresses the ground coffee (Fig.5.4 - Fig.5.5).
– the pump that dispenses the quantity of programmed water and that is
controlled by a specific electronic device, (volume meter), extracting the
water from the coffee boiler(Fig.5.6).
– the coffee group geared motor is activated again so as to bring again
into standby position ; during this movement the used coffee grounds
are expelled
The sequence of these operations (grinding and coffee dispensing) could
occur in inverse order according to the type of programme used.
SPOON DISPENSING
This process is activated only in the versions where the spoon dispenser is
foreseen; In these versions it is possible to select the spoon in the selections
without sugar and/ or in the instant selections.
- the geared motor that operates the spoon release device is activated
making the spoon fall into the cup. (Fig.5.7).
INSTANT DRINKS
This process is activated when the cup and spoon dispensing processes have
been completed.
According to the type drink requested and to the distributor model, several
of the various processes described here below can be activated.
– If present, the whipper motor is activated (Fig.5.8)
- The electro valve fixed on the soup boiler (Fig.5.9) or on the coffee boiler
(Fig.5.10). it is activated to introduce into the mixer the programmed
water quantity.
- The instant product geared motor activates the helicoidal screw conveyor
so as to dispense the quantity of product programmed into the mixer (in
some versions several products can be processed in the same mixer such
as milk and chocolate) (Fig.5.11)
- Once the preset water and powder quantity has been preset has been
supplied, the mixer is disabled after a time (T) set during the programming.
22
ENGLISH