Idiomas disponibles
Idiomas disponibles
�� How to Use
How to Use the Screwdriver
Bits are stored in the base magnetically. The
screwdriver bit is removed from a storage box,
and the bit is inserted into the bit holder.
After the bit is inserted into the bit holder, it is
magnetized in the middle magnetizing area.
Magnetic force can be generated, and most
screws can be attached by the magnetic force.
Magnetizing
When the bit magnetism is insufficient, the bit can
be magnetized in time by placing the bit top at the
magnet of the receiving tank for 5S. The magnetic
force of the bit will decrease when stored for a long
time, so the bit should be regularly magnetized.
Forward/Reverse rotation button
Press the ∨ end to turn in or tighten screws.
Press the ∧ end to loosen or remove screws.
Indicator status
If the battery level is below 20% when the screwdriver is in
use, the indicator will blink red quickly for 5 seconds, and it
will turn off when the button is released. Please charge the
battery in time.
When charging, the indicator will slowly blink red.
When the battery is fully charged, the indicator will stay white.
2
