Honeywell Home DR65A3000 Guía De Instalación Profesional

DR65A3000
INCLUDED IN THIS BOX
A
Note: If IAQ thermostat such as Prestige™ IAQ kit is used, a separate dehumidity control is not needed.
D
D
1
Tools required to install DR65A3000 dehumidifier
3/8" hex drive
Drill or duct cutting tool
Wire stripper/cutter
Standard screwdriver
T20 Torx screwdriver
Duct tape
8" round duct and starter collar
18-22 gauge, 5 conductor thermostat wire
1/2" diameter drain line (8')
1/2" drain clamps (2)
3/4" male NPT drain outlet
Options
1/2" drain p-trap (may be required by local code)
Drain pan
Float switch or water sensor (normally closed)
B
OPTIONAL CONTROLS SOLD SEPARATELY
D
2
PROFESSIONAL INSTALLATION GUIDE
GUIDE D'INSTALLATION PROFESSIONNELLE
GUÍA DE INSTALACIÓN PROFESIONAL
C
DR65A3000
PROFESSIONAL INSTALLATION GUIDE
GUIDE D'INSTALLATION PROFESSIONNELLE
GUÍA DE INSTALACIÓN PROFESIONAL
INCLUDED IN THIS BOX
A B C
DR65A3000
GUIDE D'INSTALLATION PROFESSIONNELLE PROFESSIONAL INSTALLATION GUIDE
GUÍA DE INSTALACIÓN PROFESIONAL
INCLUDED IN THIS BOX
A B INCLUDED IN THIS BOX C DR65A3000 A B PROFESSIONAL INSTALLATION GUIDE C GUIDE D'INSTALLATION PROFESSIONNELLE GUÍA DE INSTALACIÓN PROFESIONAL
3/8" hex drive Tools required to install DR65A3000 dehumidifier D Standard screwdriver Duct tape T20 Torx screwdriver Drill or duct cutting tool Wire stripper/cutter C A 2 1 1 B D Installation Guide 3 OPTIONAL CONTROLS SOLD SEPARATELY D Prestige IAQ Kit MERV 11 Filter (1) DR65A3000 (1) D D 5 4 D D D 6
Drain pan Float switch or water sensor (normally closed) Options 1/2" drain p-trap (may be required by local code) 3/4" male NPT drain outlet 1/2" drain clamps (2) 1/2" diameter drain line (8') 8" round duct and starter collar D T10 Pro Smart H6062 HumidiPRO Digital Humidity Control 6 TruelAQ 4 D 3 2 VisionPRO™ Smart or VisionPRO™ RedLINK D 5 H8908 Manual Dehumidistat D D 33-00297EFS-05
Note: If IAQ thermostat such as Prestige™ IAQ kit is used, a separate dehumidity control is not needed. D OPTIONAL CONTROLS SOLD SEPARATELY
D D D D D
Tools required to install DR65A3000 dehumidifier 1 2 3 4 5
3/8" hex drive Standard screwdriver Wire stripper/cutter Drill or duct cutting tool B A C Installation Guide MERV 11 Filter (1) DR65A3000 (1)
Duct tape T20 Torx screwdriver 8" round duct and starter collar 2 D D 1 H8908 Manual Dehumidistat Prestige IAQ Kit
1/2" drain clamps (2) 1/2" diameter drain line (8') D 3 4 D H6062 HumidiPRO Digital Humidity Control VisionPRO™ Smart or VisionPRO RedLINK®
3/4" male NPT drain outlet Options 5 D (HVAC fan wired to DR65, not H6062) T10 Pro Smart
Float switch or water sensor (normally closed) Drain pan 1/2" drain p-trap (may be required by local code)
33-00297EFS-11
OPTIONAL CONTROLS SOLD SEPARATELY
Note: If IAQ thermostat such as Prestige™ IAQ kit is used, a separate dehumidity control is not needed.
D
D D D D
1 2 3 4
Tools required to install DR65A3000 dehumidifier
3/8" hex drive
A DR65A3000 (1)
Drill or duct cutting tool
B MERV 11 Filter (1)
Wire stripper/cutter
Installation Guide
Standard screwdriver C
T20 Torx screwdriver
D Prestige IAQ Kit
1
Duct tape
VisionPRO™ Smart or VisionPRO RedLINK®
D 2
8" round duct and starter collar
18-22 gauge, 5 conductor thermostat wire D H6062 HumidiPRO Digital Humidity Control
3
1/2" diameter drain line (8') (HVAC fan wired to DR65, not H6062)
1/2" drain clamps (2)
D T10 or T10+ Pro Smart Thermostat
3/4" male NPT drain outlet 4
Options
1/2" drain p-trap (may be required by local code)
Drain pan
Float switch or water sensor (normally closed)
33-00297EFS-13
D
3
DR65A3000 (1)
A
MERV 11 Filter (1)
B
Installation Guide
C
Prestige IAQ Kit
D
1
VisionPRO™ Smart or VisionPRO RedLINK®
D
2
H6062 HumidiPRO Digital Humidity Control
D
3
(HVAC fan wired to DR65, not H6062)
D T10 or T10+ Pro Smart Thermostat
4
D
4
33-00297EFS-15