Mounting Stake Assembly:
Use the included hardware to
assemble your GMW mounting
Mounting Bracket
stake. Attach the extention legs to
the bracket, and then the end
stakes to the extention legs as
shown. Attach your filtration system
Extention Legs
bracket to the mounting stake
bracket, and you are ready to place
your filtration system anywhere in
your yard or garden area.
CAUTION! FREEZING!
End Stakes
Winterize your PRO GROW 2000:
Be certain to winterize your GrowMax Water filtration unit before the outside
temperature drops below freezing. Freezing water expansion will cause
your filter housings to crack and break, and this will void your warranty.
To winterize your unit, turn off the water supply and remove the filter
housings and filters. Empty the water from the housings, and store in a dry,
protected
place until you are ready to turn your systems back on in the spring.
Limited Warranty:
A one year warranty comes with each system and protects against
manufacturer defects on all components. The warranty does not include
obstructed filters due to lack of regular maintenance or due to excessive
sediment or chlorine in your water. The warranty also does not include
damage to the unit from use outside of normal grow and garden installation
parameters, or due to not winterizing your system.
Technical Support and Contact:
If you have a particular application or setup question, please contact
Growmax Water at:
Register your product warranty online at:
www.GrowMaxWaterUSA.com/register