Yeyian SIGURD 2502 Manual Del Usuario página 3

Idiomas disponibles

Idiomas disponibles

IMPORTANT PRECAUTIONS
1. Before using this device, please read all the instructions in this manual carefully.
2. Please keep the manual for future reference.
3. Unplug this device from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use LCD
screen detergent for cleaning if it is still dirty.
4. Do not use parts not recommended by the manufacturer, otherwise it may cause
a hazard.
5. When unplugging the power cord of the monitor or adapter, please hold the plug
with your hand, do not pull the cord directly.
6. Do not place any object on the power cord. Do not trample it either.
7. Do not use the device near water sources, example: bathtub, basin, kitchen sink,
or washing machine. Do not place the device on a wet floor, or near a swimming
pool etc. Do not touch the screen with your fingers or other hard objects.
8. Slots and openings on housing and its back or bottom are provided for
ventilation. To ensure reliable operation of the components and to protect them
from overheating, these openings must not be blocked or covered placing the
device on a bed, sofa, rug, or other similar surface. The device should never be
placed near or over a radiator or heater and should not be placed in a built in
installation unless proper ventilation is provided.
9. Make sure that the device is at least 5 cm distance from the wall or other objects
around when it is in use.
10. The power supply must respond to that stated on the rating plate. If you have
any query about the power supply, please refer to the dealer or local power supply
provider.
11. As a safeguard measure, the monitor or adapter is equipped with a power cord
with three-terminal plug, the third terminal is grounded. If the plug cannot be
insterted into the outlet, please contact an electrical technician for replacing the
original outlet while keeping the safeguard measure in effect.
12. Ensure that the power socket and cord in use are able to take the sum of the
electric current of all the products.
13. Do not put the device at the place where user is subject to mal-function.
14. Observe all the warnings and instructions described in the manual.
15. Do not overload the power outlet or use any extension cord, otherwise it may
cause fire or electric shock.
16. Do not attempt to repair this device yourself since opening or removing covers
may expose you to dangerous voltage or other hazards. Refer servicing to qualified
service personnel.
17. Unplug this monitor or AC/CD adapter from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or worn.
B. If the device has been dropped or its housing has been damaged.
C. When the performance of the device deteriorates distinctly.
18. The power cord is the main facility to turn on/off the device; unplug it if the
device is not used for a long period of time.
19. Store the device at a place of good ventilation; avoid strong sunlight, high
temperature or humidity.
20. Store the device at a place at -20°C - 55°C room temperature. Otherwise, it may
cause permanent damage.
loading