VOLTOMAT HEATING OR22RC-9 Manual Del Usuario página 16

off the power by pressing the power switch to the position "O", the indicator light for the power switch
goes out. Unplug the appliance.
Note: You can always change the temperature unit on display by pressing the ℃/℉ switch button.
If you don't set the temperature, the appliance will maintain the default 24℃ (75℉).
Pressing the mode button once, twice or three times, you can change the mode setting among
temperature, AUTO-OFF timer and AUTO-ON timer.
Timer (AUTO-OFF / AUTO-ON)
Press the mode button and when the LCD display has a "AUTO-OFF" and clock icon flickering, set the automatic
turn-off time by pressing "＋" or "－" button. For example, if you set the hour number as "06", then the
appliance will turn off automatically after 6 hours.
Press the mode button and when the LCD display has a "AUTO-ON" and clock icon flickering, set the automatic
start-on time by pressing "＋" or "－" button. For example, if you set the hour number as "12", then the
appliance will turn on automatically after 12 hours.
Note: In both AUTO-OFF and AUTO-ON setting, the time duration is 1 to 24 hours.
SAFETY SYSTEM:
The appliance has a safety system which automatically switches the unit off when overheated.
⚫
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for
⚫
at least 10 minutes.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
⚫
switch off the power if it is tilted accidentally. Be careful that the surface of the appliance may remain hot
when the appliance has just toppled over.
MAINTENANCE AND CARE
The oil heater should be cleaned regularly; wipe the dust off the surface of the fins. This improves
⚫
radiation.
Unplug the appliance from the power supply and allow the appliance to cool down completely.
⚫
Wipe the appliance with a soft damp cloth. Do not use detergent or abrasives.
⚫
Do not scratch the fin surfaces with sharp tools. Damages of the coat layer result in rusty spots.
⚫
STORAGE
Ensure that the oil heater is completely cooled off.
⚫
Store the appliance in a cool and dry place.
⚫
WARNING
If you have a problem with your heater, please do not attempt to repair it yourself. This action may cause
damage or personal injury.
TECHNICAL DATA:
Operating voltage: 220-240V ~ 50Hz
Power consumption: 2000W
- 15 -