Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-5054, H-5055
CLASSIC CONFERENCE
TABLE
TOOLS NEEDED
Phillips
Screwdriver
A
Camlock Pin x 12
E
L-Bracket x 5
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching the table.
• Check that all parts are included.
IMPORTANT: The arrow on the camlock (B) must
point toward the camlock pin (A) for proper
alignment. Turn camlock (B) clockwise until it
locks with pin (A).
IMPORTANT: Function of Cam
Make sure the arrow is pointing upwards
before inserting into the panel's hole.
1.
Insert four camlocks (B) into corresponding holes on
modesty panel (1). Insert four camlock pins (A) and
four dowels (C) in legs (2). Fit leg (2) and modesty
panel (1) together and turn each camlock (B)
clockwise until it locks. Cover each camlock (B) with
a camlock cap (H). (See Figure 1)
PAGE 1 OF 6
Drill
(Optional)
B
Camlock x 12
F
Screw x 35
#4 5/8"
1/4 Right Turn
for Locking
1-800-295-5510
uline.com
Two Person Assembly
Required
PARTS
C
Dowel x 11
G
Deep Camlock
Cap x 5
ASSEMBLY
2. Repeat to attach second leg and modesty panel
together. (See Figure 1)
1
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
D
Floor Glide x 4
H
Camlock Cap x 7
A
C
2
H
B
1
2
2
Figure 1
0423 IH-5054
Manuales relacionados para Uline H-5054
Resumen de contenidos para Uline H-5054
- Página 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-5054, H-5055 1-800-295-5510 uline.com CLASSIC CONFERENCE TABLE TOOLS NEEDED Two Person Assembly Phillips Drill Required Screwdriver (Optional) PARTS Camlock Pin x 12 Camlock x 12 Dowel x 11...
- Página 2 NOTE: Ensure at least one L-Bracket connects modesty panel (1) to the tabletop (3) and at least one L-Bracket connects each leg (2) to the tabletop (3). NOTE: L-Bracket holes can be started with drill (optional). Figure 3 1-800-295-5510 uline.com PAGE 2 OF 6 0423 IH-5054...
- Página 3 H-5054, H-5055 800-295-5510 uline.mx MESA DE CONFERENCIA – COLECCIÓN CLÁSICA HERRAMIENTAS NECESARIAS Se Requiere Armar Desarmador Taladro Entre Dos Personas de Cruz (Opcional) PARTES 12 Pasadores de 12 Tuercas Minifix 11 Taquetes 4 Tapas para Tuerca Minifix Piso 5 Soportes en L 35 Tornillos #4 5/8"...
- Página 4 L conecte el recato (1) a la cubierta de la mesa (3) y al menos uno de los Soportes en L conecte cada pata (2) a la cubierta de la mesa (3). Diagrama 3 800-295-5510 uline.mx PAGE 4 OF 6 0423 IH-5054...
- Página 5 H-5054, H-5055 1-800-295-5510 uline.ca CLASSIC – TABLE DE CONFÉRENCE OUTILS REQUIS Montage à deux Tournevis Perceuse personnes requis cruciforme (optionnel) PIÈCES Goujon Excentrique x 12 Cheville x 11 Patin de d'excentrique x 12 plancher x 4 Support en L x 5 Vis nº 4 de...
- Página 6 L relie le panneau cache-jambes (1) à la surface de table (3) et qu'au moins un support en L relie chaque pied (2) à la surface de table (3). Figure 3 1-800-295-5510 uline.ca PAGE 6 OF 6 0423 IH-5054...