Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTE: Engine should be running while using this inflator. See Warning Section for further
details.
INFLATE TIRES
1. Screw air hose connector onto tire's valve stem.
2. Plug power cord into 12 volt accessory power outlet or into a 120 volt wall outlet.
3. Toggle ON/OFF switch up to the single line to turn on inflator. Once desired pressure is
reached, toggle ON/OFF switch again to center circle to turn off inflator. Unplug power
cord and remove all connections.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side
door jamb.
INFLATE RAFTS AND MATTRESSES
The raft air pump is used for inflatables only (more specifically high volume/low pressure
applications) and cannot be used for tires and balls, which require higher pressure.
1. If desired, attach the inflation adapter (connected to the air hose) to the high volume air
hose.
2. Connect high volume air hose to the inflate portal (on the left) on the front of the inflator.
Insert opposite end into the inflatable's air inlet.
3. Plug power cord into 12 volt accessory power outlet or into a 120 volt wall outlet.
4. Toggle ON/OFF switch down to the double line to turn on inflator. Once desired pressure
is reached, toggle ON/OFF switch again to center circle to turn off inflator. Unplug power
cord and remove all connections.
Tabla de contenido
